Click image to view full size image
M25-B Standard Wood Engraver
A.Auto oiling system
B.Duble tube collector dust
C.DSP control system
D.Dust collector
E.Well compatibility:CAD/CAM desiging software e.g.Type3/Artcam/Castmate/Wentai etc.
Technical-parameters
Model | M25-B |
XY working area | 1300x2500mm |
Z working area | 200mm |
Table size | 1480x3000mm |
Max feeding | >25m/min |
Work-holding | By suction |
Processor | DSP/Frequency 100MHz |
Interface | USB |
Command | G code*.u00*.mmg*.plt |
Surroundings for software | DSP with 128MB flash memory |
Power(not include the spindle) | 1840W |
Working voltage | 380V/50Hz |
spindle power rate | 4.5KW |
spindle rotating speed | 0-18000rmp/min |
Drive motor | Stepper |
wood engraver machine
